Secrets To Install A Amplifier To A Car Radio
February 4, 2010 by Nell Harrison · Leave a Comment
Music systems have become an essential one for us as it helps us to relax from our pressures. Loudness and the clarity of the music talk a lot about the quality of the system we use. To increase the loudness and clarity of the music we use amplifiers. After reading this article you will know how to connect an original car stereo to an amp.
The works requires the following tools to proceed. It will require screw drivers of the Philips company, a drill, a panel tool, a kit which contains amplifier wirings , groomets and spacers made of rubber. It will also require the use of wires and harness adapter.
The negative cable from the car's battery is removed initially. The battery's negative terminal is actually connected with the negative cable and to the car's frame. The cable's clamp is loosened with the use of a Philips screw driver. The clamp is removed and it is kept aside until the task is accomplished.
Now the ring terminal of the amplifier, whose fuse has been removed, is connected to the positive lead of the battery. This ring amplifier is obtained from the kit. A screw driver may be used for this purpose. A hole is drilled in the firewall which is in the compartment of the car engine. This is used for the power supply of the amplifier. The wiring is protected using groomets. The amplifier is placed in the vehicle's trunk. In case of trucks it is placed under the seat. Spacers are used in this case to provide ventilation.
The amplifier is mounted on the trunk of the car. In the case of trucks the amplifier is mounted below the seat to provide ventilation. The vehicle's stereo is removed. The removal procedure varies from one vehicle to other. The manual which is issued along with the vehicle by the manufacturer is to be referred often. The stereo unit is pulled to the dash till the wiring in the rear.
In the next step a hole is drilled in the compartment of the engine so as to pass the battery power to the location where the amplifier is connected. A coating of rubber grommet is made on the wire to protect the opening. It always better to place the amplifier in the trunk. In case of a truck, the amplifier can be mounted in the space below the seat but one should ensure that there is enough air circulation in that place.
The wires are connected to the speakers from the amplifier. This is done with the help of the instructions given in the manual of the car. The stereo is placed on the dashboard of the car. The fuse is inserted in the socket. The negative cable of the battery is reconnected. The clamps need to be tightened properly with the help of a screw driver. This clamps need to be in proper position which will avoid it to be loosened or moved by using one's hand.
In the next step two more wires are connected to the adapter those includes a signal cable and another is the turn on lead. From this the cables are brought to the location of the amplifier. Then connect the speakers and give power supply to the amplifier. And in the end connect the fuse. So one must always know how to connect an original car stereo to an amp.
Want to find out more about Car Hifi, then visit Author Name's site on how to choose the best Car Audio for your needs.
Tags: amp, amplifier, Automotive, business, Cars, cars_and_trucks, online_business, powernetshop.at, radio, vehiclesRelated posts
What Is A Power Supply
January 25, 2010 by Mat Davis · Leave a Comment
Alternating current or AC current needs to be converted to DC power for running few components. In this article we shall see how to wire an AC to DC converter. The power that is available in our house is standard DC power. By following few steps for wiring ,we can convert them to DC which may be needed to run equipments which needs only DC . Audio components of vehicles like cars needs only such DC power.
Since it involves with the handling of current some preliminary precautions must be kept in mind. Few things that will be required to carry out this are wire stripper, tools for crimping and ring terminals. The following instructions are carefully carried out for safety. This involves only a few connections and some initial steps.
The first thing to be done is to remove thumb screws or any similar thing like wing nuts. These are removed from the terminals of the DC power of the converter. This can be done by turning it to the left.
Half inch of insulation must be removed from the DC's positive as well as the negative terminals. This is then connected securely to the AC to DC converter. The positive wire will be red in color where as the negative wires are made of black colors. This color difference is used to distinguish among them easily. Though it is not true in some cases. To avoid confusion causing problems one can always refer to the manual given to the user by the manufacturer. The wiring diagram can also be used for ensuring proper wiring.
Now its time for us to use the ring terminal and wire strippers. The terminal is crimped with the wire using the crimping tool. On the other end of the wire which is free attach the ring terminal.
The AC to DC converter has both positive and negative terminals . To this positive and negative wires are connected respectively . It is necessary that the these connections are tight. Use wing nuts and thumb screws to make them tight.
The plug corresponding to the alternating current is plugged to the outlet from the wall. The converter is the switched on to give a current supply for the device that uses DC. Here the AC from the wall socket is converted into the DC in the converter and is sent to the device there by making it to work.
This article would have been a good guide for how to wire an AC to DC converter and with just household power we can run many appliances very effectively by following the simple steps mentioned above.
Learn more about Autozubehoer. Stop by Author Name's site where you can find out all about Car stereo and what it can do for you.
Tags: Automotive, business, online business, vehicle